japanesemature成熟,国产毛多水多女人a片,邻居的丰满人妻hd学生,寂寞空庭春欲晚小说多少字

400-1885666
產品中心
QC385D
QC385D


1.Direct injection combustion chamber, easy to start, low oil consumption and economical to use.

2.Easy to install and layout, light weight and compact structure.

3.Strong power , low vibration , low steady state speed governing rate.

4.Spare parts have good versatility.

5.Power interface conforms to the SAE standard, good market interchangeability and versatility.

6.Optional electronic governor, which make the engine speed more stable and steady state speed governing rate can be guaranteed within 1%.

7.Optional installation of radiator ,air filter ,silencer and other components.


Share
  • Product introduction

  • Product features

  • Main parameter

1.Direct injection combustion chamber, easy to start, low oil consumption and economical to use.


2.Easy to install and layout, light weight and compact structure.


3.Strong power , low vibration , low steady state speed governing rate.


4.Spare parts have good versatility.


5.Power interface conforms to the SAE standard, good market interchangeability and versatility.


6.Optional electronic governor, which make the engine speed more stable and steady state speed governing rate can be guaranteed within 1%.


7.Optional installation of radiator ,air filter ,silencer and other components.


1.Direct injection combustion chamber, easy to start, low oil consumption and economical to use.


2.Easy to install and layout, light weight and compact structure.


3.Strong power , low vibration , low steady state speed governing rate.


4.Spare parts have good versatility.


5.Power interface conforms to the SAE standard, good market interchangeability and versatility.


6.Optional electronic governor, which make the engine speed more stable and steady state speed governing rate can be guaranteed within 1%.


7.Optional installation of radiator ,air filter ,silencer and other components.


MODEL

QC385D

BORE*STROKE(MM)

85×90

TOTAL DISPLACEMENT(L)

1.532

RATED POWER(KW)

10

12

STANDBY POWER(KW)

11

13.2

REATED SPEED(R/MIN)

1500

1800

REATED POWER FOR GENERATOR SETS (KVA)

10

12

STANDBY POWER FOR GENERATOR SETS (KVA)

11

13.2

REATED POWER FOR GENERATOR SETS(KW

8

10

STANDBY POWER FOR GENERATOR SETS (KW)

9

10.5

STEADY STATE SPEED GOVERNING RATE %

≤5

MAX SPEED ON NO LOAD(R/MIN

1575

MIN SPEED ON NO LOAD(R/MIN

800

SPECIFIC FUEL CONSUMPTION RATE AT MAX. SPEED (G/KW·H

≤262

NET WEIGHT (KG)

175

DIMENSION(L*W*H) 

627×545×610 (WITHOUT AIR FILTER AND RADIATOR )

ROTATION (VIEWED FROM FLYWHEEL)

COUNTER CLOCKWISE

FLYWHEEL HOUSE SIZING

SAE4#

FLYWHEEL SIZING

SAE7.5′′

NUMBER OF TEETH OF THE FLYWHEEL

115

VALVE LAYOUT

TYPE OF THE VALVE

OVERHEAD

VALVES PER CYLINDER

ONE INLET AND ONE EXHAUST VALVE

VALVE CLEARANCE

INLET VALVE 

0.2~0.25mm

EXHAUST VALVE

0.25~0.3mm

FUEL CONSUMPTION (KG/H)

SPEED

1500

POWER

RATED 

STANDBY 

100% FULL LOAD

2.61

2.7

75% LOAD

1.9

2.1

50% LOAD

1.35

1.5

25%LOAD

0.99

1.1

FUEL SYSTEM

INJECTION TYPE

DIRECT INJECTION

SPEED REGULATOR

MECHANICAL TYPE

FUEL INJECTION PUMP

MECHANICAL TYPE

INJECTOR DIAMETER

0.25MM

INJECTOR OPENING PRESSURE

22±0.5MPA

FUEL FITLER

SINGLE POLE ,PAPER TYPE

FUEL

DIESEL

LUBRICATION SYSTEM

LUBRICATION TYPE

FORCED LUBRICATION AND SPLASH LUBRICATION 

LUBE OIL GRADE 

CD-40

LUBE OIL VOLUME 

4L

MAX ALLOWABLE OIL TEMPEARTURE

115°C

OIL PRESSURE 

MAX

650kpa

MIN

100kpa

COOLING SYSTEM

COOLING METHOD 

FORCED WATER CIRCULATION

WATER PUMP FLOW 

80L/MIN(3000RPM WATER PUMP FLOW HEIGHT 5M)

MOTOR WATER VOLUME 

3.15L

MAX WATER TEMPERATURE

95°C

RADIATOR VOLUME 

6.5 L

OPENING TEMPERATURE /FULL OPEN TEMPERATURE OF THERMOTAT

70°C/82°C

FAN DIAMETER(MM)

φ410

ELECTRICAL SYSTEM 

ALTERNATOR

14V×500W

VOLTAGE STABLILIZER

BUILT-IN VOLTAGE STABILIZER

MOTOR

12V×3kW

BATTERY VOLTAGE

12V

BATTERY VOLUMNE 

≥100AH (RECOMMENDED )

COLD START AUXILIARY DEVICE

INLET HEATER

INTAKE AND EXHAUST SYSTEM 

AIR FLOW KG/H 

63

EXHAUST FLOW KG/H 

66

MAX PERMISSIBLE RESTRICTIONS OF EXHAUST SYSTEM KPA 

≤5


SPEED SENSOR INTERFACE

M18X1.5

DISTANCE BETWEEN THE MOUNTING SURFACE OF THE SPEED SENSOR AND THE TOP OF THE FLYWHEEL GEAR RING 

16mm


主站蜘蛛池模板: 临泉县| 金坛市| 徐汇区| 黄浦区| 阆中市| 咸宁市| 柘荣县| 旅游| 永安市| 加查县| 五台县| 大洼县| 辽中县| 左云县| 通州区| 张掖市| 措美县| 广元市| 工布江达县| 马鞍山市| 阳西县| 仁布县| 昌宁县| 泽普县| 土默特右旗| 上犹县| 海盐县| 鄂托克旗| 抚顺县| 象州县| 沂水县| 南和县| 巴中市| 许昌市| 太谷县| 西宁市| 公安县| 北票市| 遵义市| 安陆市| 淮南市|